Seen it cheaper elsewhere? | Give us a crack at it! | Contact Us or call 1800 69 2225 during business hours

Shinybow AV Over Cat5 Inline Transmitter and Splitter SB-6950

SKU
ACL-133027
In stock
Special Price $10 Was $199 RRP $599

Transmit Component Video, Digital and Composite Video over a long distance to a matching repeater or receiver.

Shinybow SB-6950 Component/Composite Video + Stereo Audio Transmitter

The SB-6950 is a distribution amplifier transmitter via simple Category 5 (CAT5) UTP cable to transmit Component Video, Digital and Composite Video aver a long distance to a matching repeater or receiver.

Features

• Support Component/Digital audio/Composite Video Extender
• Triple high-speed differential driver
• 225 Mhz, -3dB large signal bandwidth
• 450 Mhz, -3dB small signal bandwidth
• Easily drives 1.4Vp-p video signal into doubly terminated 1000-ohm UTP cable
• Slew rate 1600V/s, Fixed internal gain of 2
• Support HDTV resolution 480p, 576p, 720p, 1080i
• High isolation between amplifiers: 80 dB @ 10 MHz
• Low offset chip: 3 mV typical output referred on 5 V supply. R.,dm=200-ohm
• Low power chip: 26.5mA @ 5V for three drivers and sync circuitry
• Category UTP cable maximum length to 1000 ft
• Enclosure type: wall mount metal case
• Support Lower power consumed full load under 350 mA
• Compatible with the Shinybow SB-6930 Receiver/Repeater

Support three groups of signals in one extender

1. Component Video (YPBPR)
2. Digital Audio (PCM) and Stereo Audio(AR/AL)
3. Composite Video and Stereo Audio(AR/AL)

The transmitter provides excellent overall performance and versatility. It defines a major advancement beyond using discrete op amps for transmitting differential YUV/RGB/DigitalAudio /Composite Video signals over twisted pair category cable. Use a triple, differential or single-ended input to differential output transmit. Specifically designed for RGB signals but can be used for any type of analog signal or high-speed data transmission. Auto Tint and brightness control design on board. High-speed amplifiers designed to operate three group signals with high-performance quality of HDTV signals. The length to 1000 feet extends to the repeater or receiver for output to multiple high-definition HDTV/Speaker/plasma displays. Use category 5, 5e or 6 cables. Transmitter support double CAT5 outputs and one loop-out port for previewing AV sources by HDTV display on the same time. The terminates are Rj45 (Category 5) jack.

More Information
Model Number SB6950
RRP 599.00
Specs

Type of Extender
Transmitter

Type of Signals
Component Video/Digital (PCM)/Audio/Composite Video/Stereo Audio

Video Bandwidth
225 Mhz, -3dB large signal bandwidth
450 Mhz, -3dB small signal bandwidth

Slew Rate
1600V/s

Output balance error
-60 dB @ 50 Mhz

High isolation
Between Amplifier 80 dB @ 10 Mhz

Video in/out impedance
75 Ohms

Video Maximum in Levels
1.45 Vp-p

Audio impedance
10K Ohms

Audio Frequency response
20Hz to 20KHz, +/-1db

Audio Maximum in levels
3.1 Vp-p(line level)

Loop out function
Support one Loop Output port

Low distortion
-80 dBc total harmonic @ Mhz; R=100

In/Out Terminal
Rj-45 Jack, Color-coded RCA female connectors.

Dimensions (W.D.H.)
210mm x 112mm x 26mm

Net Weight (Unit Only)
About 965 gwm (with metal case)

Power Voltage Input
DC 12V @ 500 mA or upto -3 A accepted

Write Your Own Review
You're reviewing:Shinybow AV Over Cat5 Inline Transmitter and Splitter SB-6950
Your Rating
12 Months
All of our products include a minimum 12 month Australian warranty.

Problems?
If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
We offer a 30 day 100% satisfaction guarantee on all of our products! If your order arrives damaged, faulty or not quite as you expected, please contact us and we will do everything we can to fix the situation.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.