Shinybow AV Over Cat5 Repeater & Receiver SB-6930

Shinybow SB-6930 Component/Composite Video + Stereo Audio Receiver/Repeater

The SB-6930 is a CAT5 distribution amplifier repeater with high speed of 160 Mhz (large signal bandwidth) by using Category 5 UTP cable extended to CAT5 Receiver or CAT5 repeater way of signals of Component Video, Digital Audio, Composite Video for output to multiple High Definition HDTV/Speaker display. User adjustable gain the Tint and brightness with high-frequency broadband gain adjustment. Differential to single-ended receiver specifically designed for receiving Component/Digital/Audio signals over twisted pair cable. There are three groups in one repeater with high performance for extending signals of component video (YPbPr/YCbCr/RGB), digital audio(PCM)/stereo audio and composite video/stereo audio for length to 1000 feet extended to a CAT5 RECEIVER or another REPEATER and use category 5, 5e or 6 cables. REPEATER has four distribution amplifier outputs and one loop output of CAT5 port to other REPEATER or RECEIVER. The terminates are Rj45 (Category 5) jack.

Features

• Support Component/Digital audio/Composite Video Extender
• High speed 160 Mhz. large signal bandwidth
• High CMRR: 65 dB @ 10MHz
• High differential input impedance: 5 M-ohm
• Input common-mode range: 10.5V (+12V supplies)
• Input: differential or single-ended
• Tuned to compensate for Category-5 (VATS) cable losses Up to 100 meters @120MHz
• 2 voltage-controlled frequency response adjustment pins
• Low output noise:1.5mV rms integrated noise(1GHz)@100 meters
• Equalized pass-band ripple + 1dB to 70 Mhz
• Enclosure type: wall mount metal case
• Support Lower power consumed full load under 350 mA
• Compatible with the Shinybow SB-6950 Transmitter

Support three groups of signals in one repeater

1. Component Video (YPP)
2. Digital Audio(PCM) and Stereo Audio(AR/AL)
3. Composite Video and Stereo Audio(AR/AL)