Our stores and customer service department will be CLOSED Thursday 25th for the ANZAC Day public holiday. (*our website is Always Open!)

The Selby Everyday Price Promise. Shop Now With Confidence!

Vincent SA-T7 MK Stereo Tube Preamplifier

SKU
SAT7MK.con
In stock
From $4,699

With the SA-T7 MK, Vincent has further improved on a tube preamplifier that brings delicate music signals to a level of purity and authenticity never before thought possible.

With the SA-T7 MK, Vincent has further improved on a preamplifier that raises the standard for pure amplification of music signals.

After several successful years, Vincent have revised their reference preamplifier. The SA-T7 becomes the SA-T7 MK. Beside the modernised design, the preamp also has a Bluetooth input, which allows you to transfer your music from any mobile phone or tablet to the unit easily.

The new SA-T7 MK still combines linear amplification with extremely low levels of unwanted noise thanks to the BestPentode circuit developed by Dipl-Ing (Master of Engineering) Frank Blöhbaum inside the SA-T7 MK, essentially eliminating distribution noise typical of vacuum tubes.

Key Features:
- Built-In DAC
- Bluetooth (V5.0) wireless input
- Low Noise, High Fidelity Sound
- Newly developed BestPentode circuit
- Tubes: 4 x 6SCH9P, 4 x 6SCH51P, 1 x 85A2
- Bypassable Tone & Gain Control
- 6 Analog Inputs & 2 Digital Inputs
- Total of 2 x RCA Pre-Outs, 1x Rec Output
- Included remote control for easy input selection & volume control

User Manual (PDF, 6.17MB)

BestPentode Tube

The SA-T7 MK stereo preamplifier has many selling points that make it a fine addition to your Hi-Fi system. The most notable of these is it's linear amplification method, which results in an extremely low level of noise introduced into the signal. Far lower than any other preamplifier in its range. This is achieved with Vincent's new valve technology.

The BestPentode device has a higher level of amplifying small noise than other triodes. This high-level grid pentode type CV6189 tube displays its whole potential. This tubes are new old stock (NOS) from storage that were used for amplifying high-frequency signals around the clock in telecommunication.

The impedance converter consists of a grid triode. The noiseless power supply connectors of the BestPentode device provides for an extremely pure audio transmission. Vincent developed their own module called Vimala (meaning in Sanskrit "pure, transparent and clear") for this purpose.

Adjustable
The SA-T7 MK's front panel features gain and tone-control options that allow you to make fine adjustments to the sound of your source material before it even hits the main amplifier. Make tone adjustments with the treble and bass dials on the front of the unit. Deactivating the Tone switch on the front of the unit bypasses these controls, giving you an easy method of listening direct, so you can choose to hear your source material with or without adjustments.

Connection Options
The SA-T7 MK includes connections for a wide range of audio sources, accepting both analogue sources via the 6 stereo RCA inputs, and digital sources via the Optical and Digital Coax inputs as well as a new Bluetooth wireless input. The digital inputs let you enjoy two-channel audio from Blu-ray players, streaming devices, set-top boxes, CD players, etc.

In addition to this on the output side, the SA-T7 MK offers two stereo RCA-type preamp outputs along with one stereo RCA-type 'Record' out.

About Vincent
Vincent is a German brand and manufacturer of Class-A Hi-Fi equipment. Since 1995, Vincent has stood for continual development to 2-channel stereo in the high-end class.

The Perfect Match
The SA-T7 MK is the perfect match for the rest of Vincent's tubeLine range!

Pair up the SA-T7 MK preamplifier with a quality power amplifier, and a media player of your choice for a superb home audio experience.

With all your Vincent appliances working together in harmony, controlling them all is painless with the “Power Control” connections on the rear. These allow the amp to respond to turn-on and turn-off signals from other devices in the signal chain. 

More Information
Model Number SAT7MK.con
RRP 4,699.00
Specs

Frequency response: 10 Hz – 100 kHz +/- 0.1 dB,
Nominal output voltage: 3 Volt
T.H.D.: < 0,001 % (1 kHz, Output Voltage 2Veff an 10 KOhm)
Amplification: Typical 13.3 dB (volume controller max. gain)
Input sensitivity: 430 mV (for 2 Volt output voltage)
Signal-noise ratio: Typical >100 dB(A)
Input impedance: > 22 kOhm
Max. Power Consumption: 58 Watt
Tubes: 4 x 6SCH9P, 4 x 6SCH51P, 1 x 85A2
Playable Digital Formats: WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA

Inputs:
6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
Outputs:
2 x Stereo RCA (Pre Out), 1 x Stereo RCA (Rec Out),
2 x 3.5 mm Jack socket (Power Control)

Colour: Black
Weight: 8.5 kg
Dimensions (WxHxD): 430 x 135 x 370 mm

Write Your Own Review
You're reviewing:Vincent SA-T7 MK Stereo Tube Preamplifier
Your Rating
2 Years
All of our Vincent products include a 2 year Australian warranty.

3 Months
The vacuum tube in this product is covered under a 3 month warranty.

Problems?
If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.