The IP250UHD-RX is an industry-leading 4K HDCP 2.2 HDMI video scaling receiver that delivers HDMI, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m from a compatible transmitter unit.
The BluStream UHD Multicast distribution platform allows virtually latency-free (1 frame) distribution of HDMI video over a 1Gb Network.
Compatible with the current IP200 platform, the IP250UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that using visually lossless compression technology delivers HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture, or greater distances using the in-built Fibre SFP port.
The IP250UHD-RX features dual RJ45 network ports for independent or combined HDMI and/or Dante signal distribution. The unit can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available, the Multicast solution is ideal for both commercial and residential installations.
The IP250UHD-TX features 4 operational modes, and can be hooked up to compatible receivers via:
• Matrix distribution (requires 1Gb network switch)
• Video wall (requires 1Gb network switch)
• One-to-one HDMI extender (no network switch required)
• One-to-many HDMI extender (no network switch required)
• Advanced UHD video over 1Gb Network
• Operates as a stand-alone system, or together with existing IP200UHD products
• Virtually unlimited system size
• Extends HDMI and Dante up to a distance of 100m over a single CAT cable
• Dual RJ45 network ports configurable for independent or combined HDMI and Dante signal distribution
• SFP port for independent or combined HDMI and Dante signal distribution over a single fibre cable
• Video up-scaling and down-scaling
• Supports up to 4K 30Hz UHD video output
• In-built 2ch Dante transmitter for breakout of audio from HDMI source or local analogue audio input
• In-built 2ch Dante receiver for embedding of audio onto the HDMI signal or breakout to local analogue audio output
• Optical (S/PDIF) audio input for conversion of digital audio format onto Dante audio system
• Analogue L/R audio outputs support both balanced and unbalanced audio signals
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
• Advanced signal management for independent routing of IR, RS-232, USB/KVM*, audio and video
• OLED front panel display for advanced system information and manual configuration
• PoE (Power over Ethernet) to power Blustream products from PoE switch
• HDCP 2.2 compliant with advanced EDID management
• Local 24V 1A power supply should Ethernet switch not support PoE (not included)
AV systems have traditionally required point-to-point physical connections between devices, resulting in cumbersome amounts of specialized, single-purpose cables that define where audio and video signals can go. Changes are labour-intensive and expensive, and noise and signal degradation are constant companions as distances grow. The result is systems that are difficult to deploy and even more difficult to adapt as demands shift.
Dante replaces all of those connections with a computer network, effortlessly sending video or hundreds of channels of audio over slender Ethernet cables with perfect digital fidelity. All connections are now managed with software, making routes fast, readable and reliable. Because all devices share the same network, signals can be sent between any devices no matter where they are located on a site, with no change to the wiring at all. Dante systems are easily expanded, exactly as one might add a printer to a network. Just connect additional devices to any available network jack and start using it.
Performance is second to none: all Dante audio is 100% lossless 24- or 32-bit, and sample rates from 44.1 kHz to 192 kHz are supported. Dante AV does the same job with video, taking compressed video signals and converting them into IP packets that share the same timing and control mechanisms as Dante audio. Dante is the evolution of AV systems, converging all previous connection types into one. Dante delivers vastly superior performance while making these systems easier to use, easier to expand, and less expensive to deploy.
Founded in Melbourne, Australia, Blustream is the creation of an ambitious team of AV product managers. Utilising a wealth of experience within the consumer electronics and multi-room AV industry, we have set about delivering HDMI distribution products that offer more for the AV architect and installer, more in terms of product features and more in terms of value for money.
| Model Number | IP250UHD-RX |
|---|---|
| Specs | Video Input Connectors: 1 x LAN RJ45 connector, Box Contents |
