Hegel H30A 2Ch Power Amplifier 2x 1100 Watts

Call To Order

This product is available exclusively from our Malvern store in Adelaide SA.


• The H30A is Hegel's reference power amplifier featuring FET-technology for an incredibly clean, detailed, and rhythmic sound.

• The H30A is the spearhead of Hegel's amplifier technology. It is the large orchestra that brings life to any music in any venue.

H30A - The Orchestra

The H30A is The Orchestra. With its immense power, speaker matching is no longer an issue. The Orchestra can play any "venue", be it large stadiums or small cellar clubs, and with its unsurpassed skill and attention to detail, no music is too challenging. It conveys all music like you never thought possible. No matter what or where it plays, The Orchestra will always perform at its best. The H30A is the best orchestra you will ever experience.

Pictured with Hegel P20 pre-amplifier (sold separately)

Key Features:
• 2 x 1100 W/8 Ω
• Dual Mono
• Mono/Stereo
• SoundEngine Technology
• DualAmp Technology
• DualPower Technology
• RCA & XLR Inputs
• > 500 Damping Factor
• 56 Bipolar Transistors

Full Control of the Loudspeakers

The H30A is our reference power amplifier. We have nicknamed it The Orchestra because that is what it is. The H30A's job is to take command of any music on any speakers and make it sound as good as possible without ever breaking a sweat, and we can think of no more challenging music than a large orchestral piece. The H30A is an absolute powerhouse of an amplifier. In its mono state it delivers a truly astounding 1100 watts in 8 ohms, and it is completely stable even with 1-ohm loads. To achieve this, we have applied all our skills and knowledge in amplifier design and combined that with the best electronics. The H30A power supply uses 2 separate 1000 VA toroidal transformers for fast response and minimized transformer hum. With a power bank of 270,000 μF capacitors, the H30A can handle even the most challenging piece of music at any volume, it always has enough power in reserve. In the output stage we use 56 pieces 15A 200W high speed, ultra-low distortion bipolar transistors. With so much power ready at any given time, things like speaker sensitivity and variation in loads no longer come into play. With the H30A you can confidently drive any speaker you like.


Power Without Compromise

Power is however nothing without the details to match. In a large power amplifier like this, the input stage is especially vulnerable to electrical interference distorting the music signal. One troublesome type of distortion is higher-order harmonic distortion. It is a type of distortion that is far removed from the original music frequencies and can often make the amplifier sound harsh and unmusical. In the H30A input stage, we eliminate this by using single-pair FET transistors. These are carefully hand-matched transistors that have the exact same values, and therefore they have no higher-order harmonic distortion. Other types of distortion we cancel out with our patented SoundEngine technology. This actively monitors the music signal for corruptions and corrects for distortion using a feed forward design. SoundEngine effectively removes distortion in real time as the signal is amplified. These measures make the H30A sound very smooth and natural, without compromising on the details.



The H30A is designed as a mono power amplifier, but it can also be used as a stereo power amplifier. It has both balanced (XLR) and unbalanced (RCA) inputs and a 12V trigger input. For the best possible connection, the H30A features high quality, gold-plated speaker binding posts. Usually, when going from one amplifier to a more powerful one, you experience more of everything. More bass, more details, more involvement - everything is just more. With the H30A we have reached a whole new level of differences. Because the H30A is so immensely powerful and detailed, the concept of "more" simply becomes irrelevant. In the H30A the bass is tremendously deep, but never dominating. The high frequencies are exceptionally detailed, but never fatiguing. And the articulation of vocals in the midrange is just sublime. At this level, what you experience is simply total control. The H30A is an amplifier that can drive virtually all known loudspeakers with authority and ease. It never sounds forced, only relaxed and musical. The H30A is the spearhead of our amplifier technology. It is the large orchestra that brings life to any music in any venue.


SoundEngine2 Technology

The H30A uses the Hegel SoundEngine 2 amplifier platform allowing a damping factor higher than the industry average together with extremely low distortion levels. In many ways it works like a noise-cancelling headphone. It compares the output of the amplifier with the input. It detects all the sound pollution (distortion), and plays this forward into the speaker output, but in reverse phase. Like 1 minus 1 equals 0. It cancels out all pollution in real time, leaving you with only the most natural sound.

The SoundEngine technology has been developed over more than 30 years, from conception to where it is now. Millions of dollars were invested in initial development. It is what makes possible the sound performance for the money in the H30A.


DualPower Technology

Hegel integrated amplifiers, power amplifiers, and sources are using completely separate DualPower power supplies for the input and voltage gain stages, and for the current output stages of the audio amplifier. The custom-designed Hegel power transformers have got separate DualPower windings feeding independent high-speed rectifiers and high-capacity power supply capacitors.

By using the DualPower power supply technology Hegel amplifiers will prevent disturbances from the high currents flowing in the loudspeakers entering the sensitive input gain stages and voltage gain stages. The Hegel DualPower technology gives lower total distortion and a higher dynamic range than normal audio amplifiers. The Hegel DualPower technology is developed in-house by Hegel and is only found in Hegel products.


DualAmp Technology

In normal audio amplifiers, the voltage gain stages and current gain stages are combined in the same amplifier module.

DualAmp Technology from Hegel separates the voltage gain stage and the current gain stage into two completely different stages. First, the music signal goes to the voltage gain stage, amplifying only the voltage level of the music signal. By doing only voltage gain in this first stage, we can use amplifier building blocks that are specially designed to do voltage amplification. After the separate voltage gain stage, we have the current gain stage, doing only current gain and nothing else.

The Hegel DualAmp technology gives lower total distortion and a higher dynamic range than normal audio amplifiers. The Hegel DualAmp technology is developed in-house by Hegel and is only found in Hegel products.

The Hegel Concept

Music enjoyed on a Hegel system is the closest you can get to the live studio session. We are proud to present The Hegel Concept - the first music system in the world that utilises the very latest technology from all related fields, like integrated circuitry, broadcasting technology, and telecommunication. More than 10 years of research and development have made it possible to reproduce music in a more natural way than ever before.

Our goal is to give music lovers the most natural and engaging listening experience possible. Real-life sound from acoustic instruments and voices from known artists were our preferred reference point while developing Hegel because nothing else would do.

Model Number HEG-H30A
RRP 29,995.00

Output power: More than 1100 W in 8 ohms (mono)
Min. load impedance: 1 ohm load
Inputs: RCA unbalanced and XLR balanced
Speaker outputs: One pair of heavy duty gold plated terminals
Input impedance: Balanced 20 kohm, unbalanced 10 kohm
Signal-to-noise ratio: More than 100 dB
Crosstalk: Less than -100 dB
Distortion: Less than 0.003% at 100 W in 8 ohm
Intermodulation: Less than 0.01% (19 kHz + 20 kHz)
Damping factor: More than 500 (mono)
Power supply: 2000 VA dual mono, 270,000 μF capacitors
Output stage: 56 pcs 15 A 200 W high speed, ultra-low distortion bipolar transistors
Power consumption: 120 W in idle mode
Finish: Black
Dimensions: 24 cm x 43 cm x 57,5 cm (HxWxD)
Weight: 47.4 kg

Write Your Own Review
You're reviewing:Hegel H30A 2Ch Power Amplifier 2x 1100 Watts
Your Rating
2 Years
Hegel branded products carry a 2 year warranty against manufacturing defects.

If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.