The Blustream DA11USB has been designed to both encode 2ch USB audio to a Dante® digital signal, and decode a Dante® digital signal to 2ch USB audio.
The BluStream DA11USB has been designed to both encode 2ch USB audio to a Dante® digital signal, and decode a Dante® digital signal to 2ch USB audio.
The DA11USB features both USB Type-B and USB-C connections, selectable via a switch, and is a plug & play device that is powered either using PoE (Power Over Ethernet), or with 5V from the USB device. The DA11USB also supports AES67 RTP audio transport.
• Encodes 1ch USB audio to Dante® digital signal
• Decodes a Dante® digital signal to USB audio
• Selectable USB audio between USB Type-B and USB-C inputs
• Compliant with USB Audio Device Class Specification V1.0
• Supports 44.1 & 48 KHz sample rates @ 16 Bit
• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
• Supports AES67 RTP audio transport
• Features Class 3 IEEE 802.3af PoE for powering of product from any PoE switch
• Supports power via 5V USB for when network switch does not support PoE
AV systems have traditionally required point-to-point physical connections between devices, resulting in cumbersome amounts of specialized, single-purpose cables that define where audio and video signals can go. Changes are labour-intensive and expensive, and noise and signal degradation are constant companions as distances grow. The result is systems that are difficult to deploy and even more difficult to adapt as demands shift.
Dante replaces all of those connections with a computer network, effortlessly sending video or hundreds of channels of audio over slender Ethernet cables with perfect digital fidelity. All connections are now managed with software, making routes fast, readable and reliable. Because all devices share the same network, signals can be sent between any devices no matter where they are located on a site, with no change to the wiring at all. Dante systems are easily expanded, exactly as one might add a printer to a network. Just connect additional devices to any available network jack and start using it.
Performance is second to none: all Dante audio is 100% lossless 24- or 32-bit, and sample rates from 44.1 kHz to 192 kHz are supported. Dante AV does the same job with video, taking compressed video signals and converting them into IP packets that share the same timing and control mechanisms as Dante audio. Dante is the evolution of AV systems, converging all previous connection types into one. Dante delivers vastly superior performance while making these systems easier to use, easier to expand, and less expensive to deploy.
Founded in Melbourne, Australia, Blustream is the creation of an ambitious team of AV product managers. Utilising a wealth of experience within the consumer electronics and multi-room AV industry, we have set about delivering HDMI distribution products that offer more for the AV architect and installer, more in terms of product features and more in terms of value for money.
| Model Number | DA11USB |
|---|---|
| Specs | Audio Input Connectors: 1x RJ45, female (100Mbps Dante® network), 1x USB Type B female, 1x USB Type C female Box Contents |
