The Atlona AT-HDVS-RX is an HDBaseT™ scaler receiver for HDMI transmission over category cable. Receives AV signals up to 1080p/60Hz and 1920×1200 video with embedded multi-channel audio and control signals up to 230 feet (70 meters). Features include balanced analog audio de-embedding, RS-232 control, and Power over Category cable (PoCc) for sending remote power to the HDVS series transmitter. The receiver offers advanced scaling capabilities including image adjustment capability and an Auto-set feature for matching incoming signals to the display’s native resolution. Designed for use with the HDVS series transmitters, the transmitter/receiver pair enables auto display on/off, auto-switching, 3rd-party control, and other features. The built-in scaler works with matrix switchers to optimize source signals with different resolutions to a display’s native resolution. The AT-HDVS-RX is ideal for long-distance transmission and display control in corporate or educational settings using analog and digital sources.
- Long-distance HDMI extension
- Scaled HDMI output and input resolution control
- Audio de-embedding
- RS-232 scaler control
- Multi-channel audio compliant
- RS-232 display control
- Field updatable firmware
- Suitable for use with the AT-HDVS-TX and AT-HDVS-TX-WP transmitters
- Receives HDMI and VGA/Audio signals up to 230 ft (70m) @ 1080p over CAT6a/7 and 197 feet (60 m) @1080p over CAT5e/6
- Uses easy-to-integrate category cable for low-cost, reliable system installation
- Scales output video signals up to 1080p/60Hz and1920x1200; Set preferred input resolution from 800×600 to 1920×1200
- Assures compatibility of VGA and HDMI sources to the display’s native resolution
- Provides two-channel, analog audio signal on balanced captive screw connectors
- Improves AV system audio with the use of an external amplifier such as the Atlona AT-PA100-G2
- Image adjustments, resolution settings, and auto-set to display’s native resolution can be made from a 3rd party control system
- Seamless integration with larger, control system-based AV systems
- Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, and DTS-HD Master Audio™
- Allows any multi-channel audio stream to be used within a professional audio system
- Facilitates On/Off display control; Included software simplifies programming
- Eliminates need for complex control system in small AV systems
- Rear panel USB port provides an easy means for kit upgrades
- Ensures long term system return on investment
- LED indicators provide Power and Link status information
- Provides easy setup and troubleshooting
- The enclosure features four tabs for simple mounting
- Easily mounts behind the display
The Atlona HDVS series was designed to smooth the transition from analog to digital displays, allowing advanced HDMI display devices to be used with legacy VGA sources. The series also adds the simplicity and performance of HDBaseT technology to eliminate multiple cable runs and signal degradation that can occur with long transmission lines. Cost-effective and easy-to-terminate category cable provides additional integrator and benefits.
The AT-HDVS-RX offers an HDBaseT input and scaled HDMI output with audio de-embedding on a balanced captive screw connector. The receiver supports Power over Category cable (PoCc™) to power the remote transmitter. Used with HDVS series transmitters, the system provides a complete AV system with switching, distribution, scaling, and control that ensures overall system compatibility and ease-of-installation.
- Auto input switching
- Auto display control or control from HDVS series transmitter
- HDCP management for use with teleconference systems
- Set preferred input resolution for both VGA and HDMI sources
- PoCc to eliminate the power supply at the transmitter
- Image adjustment for best picture
- VGA compatibility with any display
- Easy to use software simplifies RS-232 programming
Model Number | ATHDVSRX |
---|---|
RRP | 799.00 |
Specs | Bandwidth: 6.75Gbps Video Audio pass through: up to Dolby TrueHD or DTS-HD Master Audio Operating Temperature: 0°C to 40°C |