Extension Arms Kit for Extra Large TVs Suits PLB TV Brackets

TV Monitor Bracket Extension Arms

These extension arms allow our existing PLB* brackets to accommodate extra large TVs up to 100". Simply affix these extension arms and your compatible TV bracket can now support large TVs with a VESA mounting pattern of up to 700 x 600mm.

Please remember however, the original TV bracket's maximum weight rating still applies. The TV bracket's maximum weight allowance does not change. Please always make sure your TV weighs less than the maximum weight rating of your chosen TV bracket.

*Compatible with the following PLB models:

• PLB102S, PLB102B, PLB102M, PLB102L
• PLB103S, PLB103B, PLB103M, PLB103L
• PLB109S, PLB109B, PLB109M, PLB109L
• PLB110S, PLB110B, PLB110M, PLB110L

Typically suits most large TVs up to 100" with a VESA mounting pattern of up to 700 x 600mm, however please always double check the mounting requirements for your exact model of TV before purchase as we cannot guarantee all 100" TVs will suit this bracket extension kit.

Installation

To attach the extension arms, place the threaded stud portion through the holes of your TV bracket arms. Slide a metal washer onto the threaded stud, and secure the extension arms by threading and firmly tightening one of the included nuts onto each stud. Both threaded studs of each extension must be attached to the TV bracket arms to ensure safe and proper installation.

IMPORTANT NOTE:
Both upper and lower extension arms must be installed on each arm of the TV bracket in order to keep the centre of balance equal. ie: Do not use only the upper or lower extensions on their own.

Installation Manual (PDF, 173KB)