43-100 inch Premium Full Motion TV Wall Bracket FMWB57-686A

Premium Full Motion TV Bracket

This bracket is a full motion wall mount for TVs 43" - 100" weighing up to 70kg. It extends out up to 800mm from the wall when fully extended and only 70mm when fully retracted. This TV wall mount is made from high-grade steel that delivers a lifetime of satisfaction and features smooth tilt adjustment between +2° ~ -15°, making it easy to find the perfect angle to reduce glare. This full motion bracket also allows you to swivel the TV up to 90° left and right for easy viewing from anywhere in a room. Please note that larger TVs may be limited to an angle smaller than 90°.

Features:

• Suits screen size 43" - 100"
• Copper Bushings for smooth movement
• Supports VESA sizes up to 800mm x 600mm
• Screen rotation: +3° ~ -3°
• Minimum extension: 70 mm
• Max extension: 800 mm
• Pivot/Swivel: up to 90° each way (left/right)
• Tilt: +2° ~ -15°
• Cable management

User Manual (PDF, 9.83MB)

Will This Bracket Fit My TV / Monitor?

This bracket will fit your TV screen (and not be visible from front on) if your TV is:
• At least 805mm wide.
• At least 610mm tall.

The four threaded mounting holes on the back of your TV need to be:
• No more than 800mm apart side to side.
• No more than 600mm apart top to bottom.

Maximum TV weight capacity is 70kg.

Full VESA Patterns supported:
300x200, 400x200, 300x300, 400x300, 400x400, 600x400, 800x400, 800x600

Copper Bushings for Smooth Movement

Upgraded copper brushings in the joints makes moving the TV bracket a breeze.

Minimum Extension: 70mm

With a minimum extension of just 70mm, this TV bracket can be as discreet as you like.

Large VESA Sizes Supported

This TV bracket supports larger VESA sizes up to 800mm x 600mm, accommodating large modern TVs.

Screen Rotation

Most cheaper brackets don't allow for any rotational adjustment so it can be hard to mount the bracket so that the TV is perfectly level. That's not the case with this bracket - with support for up to +/-3° of rotation of the front mounting plate it's easy to get your TV perfectly level.

Horizontal Swivel/Pivot (Left/Right)

This bracket allows you to turn your TV up to 90° to the left or right. Please note that larger TVs may be limited to an angle smaller than 90°.

Wall Stud Spacing

This TV bracket suits wall stud spacings of 450mm and 600mm. This bracket is perfectly suited for Australian standard wall stud spacing of 450mm or 600mm. This bracket is also suitable for mounting on brick or concrete walls.

Screws/Bolts

This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation.