Mount your LED or LCD on the Wall
This is one of our most versatile corner brackets.This slimline Corner Bracket sits closer to the wall than most other brackets and is designed for use with LED and LCD screens. Perfect for mounting your TV high on the wall in your bedroom or in the presence of curious young children with sticky hands.
- Low Profile "Slimline" Design: 73mm from wall
- Forwards Tilt: 0 to 12 degrees down
- Pivot/Swivel: up to 90 degrees each way (left/right)
- Free reusable bubble level
Vertical Tilting Action
This bracket offers vertical tilt from 0 degrees (flat) to -12 degrees (down), which is perfect if you wish to mount your TV high on the wall and tilt it down (for example, in the bedroom or in the presence of curious young children with sticky hands). The tilting action can also help to avoid annoying reflections on the screen.
Horizontal Swivel/Pivot (Left/Right)
This bracket also allows you to turn your TV up to 90 degrees to the left or right. Please note that larger TVs may be limited to an angle smaller than 90 degrees.
Low Profile "Slimline" Design
Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it impossible to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 73mm of the wall. Please note that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall, due to heat and ventilation concerns.
Free Bubble Level
This bracket includes a reusable bubble level / spirit level to assist with accurate installation of the bracket. Some brackets have a small built-in bubble level, but this stand-alone bubble level can also be used for any other jobs you have!
As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs. This bracket can also be mounted on brick/concrete walls.
Will it fit my screen?
This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 630mm wide.
- At least 325mm tall.
The four threaded mounting holes on the back of your TV need to be:
- No more than 496mm apart side to side.
- No more than 325mm apart top to bottom.
Maximum TV weight capacity is 45kg.
This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation.
User Manual (PDF, 1,008KB)
Screws and Bolts Included
User Manual (PDF, 1,008KB)