Mount Your Projector on the Ceiling!
This ceiling mount bracket allows you to easily and securely mount your projector to the ceiling. This bracket mounts your projector 115mm from the ceiling (measured from the ceiling to the bottom of the bracket). With a weight capacity of 10kg and the option to use either 3 or 4 mounting arms, this bracket offers a wide range of adjustment to suit the majority of modern LCD and DLP projectors.
Will This Fit My Projector?
This bracket is suitable for your projector if:
- the projector weighs up to 10kg. (weight usually found in the user manual)
- the projector has 3 or 4 threaded mounting holes.
- these mounting holes are no more than 420mm apart.
These threaded mounting holes are usually found on the bottom of the projector as it gets mounted "upside down".
This all steel ball mount bracket allows up to 30° of adjustment either vertically or horizontally which is more than enough for most installations! The projector mounting surface sits 115mm from the ceiling and may be removed from the upper bracket for adjusting the projector settings if required. Two sets of mounting arms are provided (140mm & 180mm) and may be adjusted on the base plate as desired.
- Round Carousel Disc.
- 3 long 180mm arms and 4 short 140mm arms for ultimate flexibility.
- Comprehensive mounting kit included to suit most projectors.
- Close to the ceiling projector bracket, sits only 115mm from the ceiling.
- Wide Adjustment range with 30 degree tilt and 360 degree swivel.
- Easy to adjust and lock into position.
- Suitable for projectors with M4, or M5 mounting points (for PJ's with other size mounts you would just need to source the right sized screws).
- Maximum distance between any two mounting points 400mm.
- Open air circular desing for better ventilation and longer Projector Bulb life.
- Max Load 10kg
- Colour: White powder coated steel
NOTE: As with all heavy duty brackets it is vital that this bracket is attached to a Metal or Timber Batton or Beam for safety reasons.