Ask an expert
1800 69 2225

Rega Aria Switchable MM/MC Phono Preamp

$1,799

Quick Overview
Available

A phono-stage pre-amplifier of exceptional quality. Compatible with both Moving Magnet & Moving Coil cartridges, this pre-amp is a critical component in your high-end Hi-Fi system.

Product Number: POS-134004
Brand: Rega
Model Number: AMP-ARIA-BLK-AUS
Condition: New
Warranty: 3 Years
Color: Black
Weight: 3804

Rega Aria Switchable MM/MC Phono Preamp

More Views

  • Rega Aria Switchable MM/MC Phono Preamp
  • Rega Aria Switchable MM/MC Phono Preamp
  • Rega Aria Switchable MM/MC Phono Preamp

Rega Aria MM/MC Pre Amp
Housed within Rega's latest half width custom designed case are two entirely separate, high performance phono stages. One a fully adjustable, dedicated moving coil and one moving magnet. Each stage is designed and engineered to maximise the potential of your vinyl system whilst remaining easy to use and set up.

This is the phono pre-amp to use to really hear a high quality analogue reproduction of music. Elevate your listening experience to the next level with the Aria phono pre-amp.

Features:
- Suits both Moving Coil & Moving Magnet cartridges
- Optimised operation for high-end performance
- High-quality components
- Rejects interference
- Can be used with 2 turntables (1x MM, 1x MC)
- Sleek, aesthetically pleasing look
- Incredibly easy to use

Technology
The Aria is an "all-analogue amplifier" with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Rega's designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature.

Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal.

This also means that you can have two turntables connected simultaneously. One into the MC input and one into the MM input. Switch between them easily with the button on the front of the unit.

MC Stage Design & Features
The MC input uses parallel connected, low noise FET's (Field Effect Transistor's) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The MC input has the provision for selecting resistive input loading of 70ohms to 400ohms and capacitive loading of 1000pF to 4200pF. The input sensitivity can be changed by 6dB via the back panel.

MM Stage design & features
The MM input uses low noise, bipolar input transistors also configured as a compound pair. There are two separate power supplies for each channel and further sub-power supplies for each of the low noise input circuits. Nichicon FG electrolytic capacitors have been used in critical positions throughout the power supplies. Polypropylene capacitors have been used in the signal path and equalization networks. Discrete circuitry is used throughout the signal path ensuring full control of the circuit design. 


Why do I need a preamp?
A phono pre-amplifier is designed to boost the signal from a turntable or record player before the signal is passed to your Hi-Fi amplifier or receiver. Typically the signal output from a turntable or record player is quite weak, and it's required to be boosted before it hits the main amplifier of your stereo or hi-fi unit.

On the Flip-Side...
Some hi-fi amplifiers or receivers have a dedicated "phono" input and some modern turntables have a "line" level output - this simply means they have a phono preamp built in and an external one is not necessary. However if your system or player doesn't have this feature built in, or if you want to use a high-end one, you'll need a separate preamp (like this one).

Maximum output level: 11V RMS
Rated output level: 200mV
Output resistance: 100Ù
Minimum output resistance for a -3dB point at 15Hz: 1K
AC supply: 230V & 115V Nominal +/- 10%


230V / 20mm Fuse / T250mAL
115V / 20mm Fuse / T500mAL
Power consumption: 10 Watts


Ambient operating temperature: 5 to 35°C
Finish: Black satin metal
Dimensions (W x D x H): 220 x 320 x 80mm


 


Aria MC dip switch settings for all Rega MC cartridge models


3 Years
Rega products include a 3 Year Australian warranty covering parts and labour and a lifetime warranty against manufacturing defects.

Register your Rega product here for full warranty coverage.

Problems?
If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
Nothing! We offer free post on all orders to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
We offer a 30 day 100% satisfaction guarantee on all of our products! If your order arrives damaged, faulty or not quite as you expected, please contact us and we will do everything we can to fix the situation.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.
No reviews have been found

You're reviewing: Rega Aria Switchable MM/MC Phono Preamp

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value
Pros Cons
Enter your Pros, separated by comma Enter your Cons, separated by comma

© Copyright 2011 Centennial Marketing trading as Selby Acoustics ABN 67 122 455 029        Website development by DirectShop