COVID-19 UPDATE: Business As Usual....... Almost! YES We're Still Shipping! Learn More

CAT6 CAT5 Network Cable Tool Kit with Tester, Crimper, Stripper, Cutter, Fittings for RJ11 RJ45 8P8C CTKIT3

Rating:
97% of 100
SKU
POS-129406
In stock
$27.99

This Network Tool Kit features the tools you need to test, cut and install ethernet cables for networking systems.

Network Tool Kit with Crimping Tool, Punch Down Tool, Cutter, Stripper, Cable Tester and Fittings
This Network Kit features the tools you need to test, cut and install both UTP and STP ethernet cables for networking systems. The various tools included in this pack will enable you to cut your own custom lengths of ethernet cable and attach either a RJ45 fitting or a RJ11 fitting onto the end of each cable. Perfect for installing ethernet cables to run from your modem and feed internet to several devices in your household. This kit is also perfect for cutting and installing your own custom lengths of cable for telephones. 

Kit Includes
 - Cable Stripper 
 - Impact Punch Down Tool 
 - Copper Cable Stripper/Cutter
 - Crimping Tool for RJ45 & RJ11fittings 
 - Cable Tester for RJ45 + RJ11 fittings (9v Battery not included)  
 - 20 x RJ45 CAT5 Fittings 
- Carry case included

Please Note*
The 20 RJ45 connectors included in this toolkit are CAT5 fittings, and not CAT6.
The rest of this pack, however, is compatible with CAT6.

More Information
Model Number 129406
Specs

Standards Compliant:
Meets TIA-568-A and TIA/A-568-B

Electrical: 
1. Voltage rating: 125 vac RMS 
2. Current rating: 1.5 amp 
3. Contact resistance: 100 milliohms max 
4. Insulation resistance: 1000 megohms min @ 500 vdc 
5. Dielectric strength: 750 vac RMS 60Hz, 1min

Environmental: 
1. Storage: -40° To +85° 
2. Operation: 0° To 70° 
Conform to tia/eia 568b category 3 
Mates with modular plug conforming to FCC part 68, subpart f.

Mechanical: 
1. Housing material:  UL94v-0
2. Insert material: Flame retardancy ABS UL94v-0 
3. PCB material: Fr-4 thickness: 1.6mm 
4. Contact material: Phosphor bronze stamp pin t=0.35mm 
5. Idc contact material: Phosphor bronze t=0.50mm with nickel plating 
6. Wire: Awg 24-26

Write Your Own Review
You're reviewing:CAT6 CAT5 Network Cable Tool Kit with Tester, Crimper, Stripper, Cutter, Fittings for RJ11 RJ45 8P8C CTKIT3
Your Rating