In stock
As low as $3,799
RRP $4,220This discreet In-ceiling 5.1 speaker system features Australian Made speakers from award-winning loudspeaker manufacturer, Krix. This package of in-ceiling speakers are not only designed for a minimal modern look, thanks to Krix's specially designed back-boxes they also have quality sound to make your living room sing. The Atmospherix A20 speakers feature angled drivers to aim the sound towards the seating position providing a more direct soundstage from in-ceiling speakers.
- 3x Krix IC-52 (Atmospherix A20) Front & Centre In-Ceiling Speakers
- 2x Krix IC-50 (Atmospherix AS) 5" In-ceiling speakers
- 1x Krix Seismix 3 (Mk7) Active Subwoofer in Black Woodgrain vinyl
The Atmospherix A20 incorporates a 20 degree angled baffle to project the sound to your primary listening area. This means less sound is reflected off walls and other surfaces. Your experience is clearer, there is a more three-dimensional soundstage, better definition for music listening, more articulate dialogue, and more realistic and involving sound effects in movies.
The bass driver and tweeter are separately mounted on the front baffle, like Krix’s bookshelf speakers, for true hi-fi performance. Bass and midrange clarity are delivered through a massive 130mm bass driver with a large magnet and copper shorting ring, while the 26mm ring radiator delivers high frequencies. A fully-enclosed back box optimises performance from the bass driver in any installation setting and protects from ceiling debris and sound leakage.
The slim paintable bezel grille, in rust-resistant stainless steel, is held in place by easy installation magnets, hiding the true magic of the Atmospherix A20 from view.
Key Features:
- 5" doped curvilinear paper cone woofer
- 1" ring radiator tweeter
- Power Handling: 20 - 120W RMS
- Nominal 6 ohm impedance
- 45Hz > 40kHz Frequency response
- Bass reflex, front vented
- Cut-out Diameter: 247mm
The ‘Architectural Series’ feature slim bezel magnetic grilles and an upgraded ring radiator tweeter.
With speaker components mounted directly on the front baffle, the IC-50 (Atmospherix AS) delivers a true high fidelity performance, and maintains accurate and controlled bass performance from the discreet in ceiling mounted enclosure.
The moving components of the IC-50 (Atmospherix AS) are protected from dust and debris through a fully-enclosed back box, designed to optimise the performance from the bass driver, allowing maximum controlled bass and consistency while drastically reducing sound leakage to other rooms.
Featuring:
- High fidelity bookshelf-speaker sound in your ceiling
- Even dispersion throughout your room
- Fully-enclosed back box
You won’t have to sacrifice musicality for low-frequency output with this tuneful speaker that will allow you to truly feel the rumble of bass with supreme clarity. The Seismix 3 is a front-firing, vented subwoofer, and features a Krix designed 275mm long-throw bass driver, developed specifically for high-level low-frequency reinforcement. Enhanced geometry within the magnet structure increases linear cone travel by a whopping 30 percent and allows superior driver control, while the built-in high-performance class D amplifier delivers increased sound efficiency with lower power consumption.
Key Features:
- 1x 275mm (11") bass driver, 50mm (2") voice coil
- Power Handling: 300 watts RMS
- Nominal 4 ohm impedance
- 22Hz > 200Hz Frequency response
- Bass reflex, front vented with internal / external flaring
- Dimensions: 450mm x 360mm x 410mm (HxWxD)
Not content with a 5.1 setup? Add an additional pair of IC-50 or IC-52 to make this a 7.1 pack! With compatible films this option expands the surround experience with side/rear or specialised height channels as well as rear channels making your favourite films even more immersive.
You'll need some quality in-wall speaker cable to hook your discreet system up. Why not grab a roll of great value 16AWG cable at the same time, and save even more! Simply select the length you need and rack up the savings!
Low-friction PVC outer jacket makes it easier to pull the cable through wall/ceiling cavities. It also provides an extra layer of protection against physical damage to the cable. The jacket is easy to strip.
This Australian-made cable has Oxygen Free Copper (OFC) conductors which can accurately transmit the signal to your speakers for accurate audio reproduction.
With gold-plated connectors and double shielding, this Y-configuration subwoofer cable is perfect for feeding a clean, superior bass signal to your subwoofer.
Featuring super-fine Oxygen Free Copper (OFC) conductors for superior audio quality. Mylar-coated aluminium shielding eliminates EMI and RFI interference.
You'll need this to start using your brand-new subwoofer. With 3m, 6m, and 10m available, it won't matter where it is in the room. Don't miss this great value cable!
Model Number | Atmospherix A20 AS Seismix3 |
---|---|
RRP | 4,220.00 |
Specs | Specifications: IC-52 (Atmospherix A20) In-Ceiling Speakers (x3) Frequency Range: 45Hz-40kHz in room response IC-50 (Atmospherix AS) In-Ceiling Speakers (x2) Frequency Range: 45Hz - 40kHz in room response Seismix 1 Mk6 Frequency Range: 25Hz - 200Hz in room response |