COVID-19 UPDATE: Stores Are Closed To Walk-In Customers. Online Trading = BUSINESS AS USUAL! Learn More

Krix Equinox 5.1 + Onkyo TX-NR474


Call to order

As low as $3,749

RRP $4,318

• Australian-made speakers

• Premium sound quality

• Choice of finishes

• Onkyo 5.1 Receiver

Krix Equinox 5.1 Pack + Onkyo TX-NR474 Receiver

This amp and speaker 5.1 system features Australian Made speakers from award-winning loudspeaker manufacturer, Krix and a network enabled home theatre receiver from Onkyo. This space conscious pack features the small but powerful Equinox bookshelf speakers for both front and rear channels, with the Graphix centre channel and Seismix 1 subwoofer rounding out the package. Available in your choice of 5 finish options* including traditional Black Woodgrain vinyl, or a more premium Real Timber veneer in either Black Ash, Atlantic Jarrah, Blackwood or Walnut.

*The Seismix 1 is only available in Black Woodgrain vinyl.


What's Included:

- Onkyo TX-NR474 Home Theatre Reciever
- Krix Equinox Mk3 Front & Surround Bookshelf speakers
- Krix Graphix Mk2 Centre speaker
- Krix Seismix 1 Subwoofer


Krix Equinox Mk3 Bookshelf Speakers

For a big sound from a small speaker, the Equinox Mk3 will astonish and surprise. With finesse and power punching well above its weight, it can be tucked-away while still filling the room with sound.

The mid-range and bass come from a high grade 130mm driver with a doped curvilinear paper cone, over-sized voice coil, and powerful magnet, while extended frequency response is delivered through a 26mm ring radiator tweeter. Combined with its bass reflex design, the result is an efficient but balanced bass sound with a revealing, detailed high end, performing well beyond the relatively small cabinet size of the speaker.

Key Features:
- 5" doped curvilinear paper cone woofer
- 1" dual concentric diaphragm with wave-guide tweeter
- Power Handling: Maximum 120W RMS
- Nominal 6 ohm impedance
- 45Hz > 40kHz Frequency response
- Rear vented enclosure



Krix Graphix Mk2 Centre Speaker

Small and compact, the Graphix is the perfect choice for use in TV cabinets and custom joinery and the dual front ports eliminate ‘boomy’ bass qualities found when using rear ported speakers in this type of application. The Graphix delivers an acoustically intricate experience every time.

Make every chair the best seat in your house with a Krix centre speaker. Krix’s centre speakers reproduce vocals and other complex information accurately, optimising imaging and sound stage. The centre channel in your home theatre system can deliver around 70% of the action and should be of a similar sonic quality to your main speakers. For home theatre applications and music listening pleasure, a Krix centre speaker will enhance your sound experience.

Key Features:
2 x 5" Bass/Mid Driver with 1" Fabric dome with Neodymium magnet 
Power Handling: 120W RMS
- Power Handling: Maximum 120W RMS
- Nominal 4 ohm impedance
- Frequency response: 50Hz > 20khz



Krix Seismix 1 Mk5 Subwoofer

For a big bass experience from a discreet subwoofer that can be placed almost anywhere in the room, the Seismix 1 Mk5 will provide the right sound while taking up half the space.

With a hefty 200mm downward firing woofer and vent, and a high quality class D amplifier, the Seismix 1 Mk5 combines high efficiency with low power consumption. Its compact design - with the raised cabinet kept off the floor with specially moulded rubber feet - provides flexibility, without sacrificing bass impact.

With effective design and simple styling, this unobtrusive subwoofer will look and sound great, whether tucked discreetly in the corner or built into custom joinery.

Key Features:
1 x 8" bass driver, 1.5" voice coil
- Power Handling: 300W RMS
- Frequency Range: 25Hz-200Hz in room response
- Output: 116dB maximum SPL in room response
- Enclosure Type: Bass reflex, down firing vent
- Low Pass Filter: 50Hz-200Hz or bypass
- Phase Select: 0º to 180º continuously variable (relative to input signal)
- Inputs: Stereo line level RCA

Onkyo TX-NR474 Receiver

Built on a high-current amp system the TX-NR474 has muscle to boost enjoyment of sound, whether it's music, a movie soundtrack, or the football. Experience the magic of Dolby Atmos and DTS:X enhancing 4K movies encoded with HDR10 or Dolby Vision via compatible Ultra HD Blu-ray players thanks to the receiver's 4K HDR pass-through function.

You can share any A/V receiver source to optional wireless speakers over FireConnect powered by Blackfire, while dual-band Wi-Fi provides stability for Chromecast built-in, DTS Play-Fi, AirPlay, and streaming services such as Spotify and Tidal. With a slick GUI and Onkyo Controller app, operation is simple. So sit back, relax, and let the sound of happiness wash over you.

Key Features:
- Supports Dolby Atmos®, DTS:X up to 3.1.2 Channels
- 135 W per Channel
- HDMI 4 In / 1 Out (4K/60 Hz / HDR10 / Dolby Vision / HDCP 2.2)
- 5 GHz/2.4 GHz Wi-Fi & Bluetooth Audio Streaming built in
- Features Chromecast built-in (firmware update required)
- 32-bit Digital Signal Processing

OPTIONAL: Upgrade the amp in this package to the Onkyo TX-NR575E to gain access to 7.2 channel surround sound!

Save 20% on matching cables!

You'll need some quality cables to get the most from this satellite system. Why not grab a roll of great value 14AWG speaker cable and a high-quality subwoofer cable at the same time, and save even more!

Simply select the lengths you need and rack up the savings!

These cables feature Oxygen-Free Copper (OFC) conductors which accurately transmit the signal to your speakers for accurate audio reproduction.

To prevent unwanted hum in your subwoofer, this subwoofer cable features mylar-coated aluminium shielding eliminates EMI and RFI interference. 

More Information
Model Number Equinox Graphix Seismix1 TX-NR474
RRP 4,318.00


Equinox Mk3

Frequency Range: 45Hz - 40kHz in room response
Power Handling: Maximum 120 watts RMS amplifier power
Sensitivity: 88dB for 2.83 volts at 1 metre
Configuration: 5 inch 2-way
Bass Driver: Cast aluminium basket with a nominal 130mm (5”) doped curvilinear paper cone.
Voice coil: 25mm (1") wound on high powered aluminium former, with copper shorting ring. Vented and double magnet shielded
Tweeter: 26mm (1") dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion.
Impedance: Nominally 6 ohms
Enclosure Type: Bass reflex, rear vented
Dimensions: 295mm high x 175mm wide x 235mm deep
Weight: 6kg each

Graphix Mk2

Frequency Range: 50Hz - 20kHz in room response
Power Handling: Maximum 120 watts RMS amplifier power
Sensitivity: 89dB for 2.83 volts at 1 metre
Configuration: Point source dual 5 inch 2-way
Bass Drivers: Fibre reinforced moulded polymer baskets with 2 x nominal 130mm (5”) doped paper cones. 25mm (1”) voice coil wound on high powered aluminium former, with vented magnet assembly. Fully shielded
Tweeter: 28mm (1”) doped fabric dome. Ferro fluid cooled. Neodymium magnet
Crossover Point: 2.1kHz
Impedance: Nominally 4 ohms Enclosure Type Bass reflex, front vented with internal / external flaring
Dimensions: 180mm high x 450mm wide x 300mm deep (including grille) Material 17mm MDF with internal bracing
Volume: 14 litres internal
Weight: 10kg

Seismix 1 Mk5

Frequency Range: 25Hz – 200Hz (-6dB) in room response
Bass Driver: Nominal 200mm (8”) diameter doped paper cone driver
Voice coil: 38mm (1.5”) wound on high powered aluminium former, with vented magnet assembly
Amplifier Power: 150 watts RMS into the nominal 4 ohm driver
Maximum instantaneous power: 300 watts
Amplifier S/N: >85dB
Distortion - Input to Speaker: <0.2% – @ 130 watts RMS
Left Line Level Input (mono): 130mV RMS for max output
Left + Right Line Level Input (stereo): 65mV RMS for max output
Output: 116dB maximum SPL in room response
Auto Power On / Off: 20 minute delay before switching to standby after no input signal
Phase Select: 0° or 180° (relative to input signal)
Enclosure Type: Bass reflex, downward firing vent with internal / external flaring
Dimensions: 375mm high x 295mm wide x 320mm deep
Material: 17mm MDF
Finish: Black Woodgrain vinyl
Volume: 21 litres internal
Weight: 11kg

Onkyo TX-NR474

Amplifier Section

Power Output: 
135 W/Ch (6 Ω, 1 kHz, 1% THD, 
1 Channel Driven, IEC)
Dynamic Power: 
160 W (3 Ω, Front)
125 W (4 Ω, Front)
85 W (8 Ω, Front)
THD+N (Total Harmonic Distortion + Noise): 0.08% (20 Hz–20 kHz, Half Power) 
Damping Factor: Over 49 (Front, 1 kHz, 8 Ω) 
Input Sensitivity and Impedance: 200 mV/47 kΩ (Line) 
Rated RCA Output Level and Impedance: 1 V/470 Ω (Subwoofer Pre Out) 
Phono Overload: 70 mV (MM, 1 kHz, 0.5%) 
Frequency Response: 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode) 
Tone Control: 
±10 dB, 90 Hz (Bass) 
±10 dB, 7.5 kHz (Treble) 
Signal-to-Noise Ratio: 
106 dB (Line, IHF-A) 
Speaker Impedance: 4 Ω–16 Ω

Video Section 
Input Sensitivity/Output Level and Impedance:  1.0 Vp–p/75 Ω (Composite)

Tuner Section 
Tuning Frequency Range
FM 87.5 MHz–108 MHz 
AM 522 kHz–1,611 kHz 
      530 kHz–1,710 kHz
FM/AM Preset Memory: 40 Stations

Power Supply: AC 220–240 V~, 50/60 Hz 
Power Consumption: 400 W 
Standby Power Consumption: 0.15 W 
No-Sound Power Consumption: 40 W 
Network Standby Power Consumption: 2.8 W 
Dimensions (W x H x D): 435 x 160 x 328 mm 
Weight: 8.6 kg

Supplied Accessories: 
• Indoor FM antenna 
• AM loop antenna 
• Speaker setup microphone 
• Quick Start Guide 
• Basic Manual
• Remote controller 
• AAA (R03) batteries x 2

Write Your Own Review
You're reviewing:Krix Equinox 5.1 + Onkyo TX-NR474
Your Rating

5 Year Warranty
All Krix speakers are Australian designed and Australian made.
Krix are so confident in the quality of their products that they provide a 5 Year Warranty with all new Krix speakers.
To claim your warranty, please register your product with Krix within 90 days of the purchase date.

Register with Krix

3 Years
All Onkyo Receivers and Amplifiers include a massive 3 Year Australian warranty so you can buy with confidence.

Authorised Dealer
Selby Acoustics is an Onkyo Authorised Internet Dealer. To ensure you are protected by an Australian warranty, buy only from authorised dealers.

Register Your Product
To receive notifications of updates for your product, you can register your Onkyo product with Ambertech (Onkyo's Australian distributor).

If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
Nothing! We offer free post on all orders to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
We offer a 30 day 100% satisfaction guarantee on all of our products! If your order arrives damaged, faulty or not quite as you expected, please contact us and we will do everything we can to fix the situation.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.