Krix Acoustix 5.1 + Yamaha RX-V685

Krix Acoustix 5.1 Pack + Yamaha RX-V685 Receiver

This 5.1 amp and speaker system features Australian Made speakers from award-winning loudspeaker manufacturer, Krix and a feature packed home theatre receiver from Yamaha. This space conscious pack features the mid sized but incredibly versatile Acoustix bookshelf speakers, with the perfectly matched Graphix centre speaker, the small but powerful Equinox bookshelf speakers and the Seismix 1 subwoofer rounding out the package. Available in your choice of 5 finish options* including traditional Black Woodgrain vinyl, or a more premium Real Timber veneer in either Black Ash, Atlantic Jarrah, Blackwood or Walnut.

*The Seismix 1 is only available in Black Woodgrain vinyl.

What's Included:

- Yamaha RX-V685 Home Theatre AV Reciever
- Krix Acoustix Mk2 Front Bookshelf speakers
- Krix Graphix Mk2 Centre speaker
- Krix Equinox Mk3 Surround Bookshelf speakers
- Krix Seismix 1 Subwoofer

Krix Acoustix Mk2 Bookshelf Speakers

Indulge in concert quality music or a stunning home theatre experience. Proud winners of the 2015 Sound+Image Loudspeaker of the Year in the $1000 - $4000 category, the Acoustix Mk2 delivers a seriously big sound for a bookshelf speaker.

Winner of Sound & Image Magazine's 2015 "Loudspeaker of the Year, $1,000- $4,000" Award.

Mid-range and bass are delivered by dual 130mm (5") high grade drivers with a doped curvilinear paper cone, high sensitivity voice coil and powerful magnet design, providing bass normally only found in larger floor standing speakers. Highs come from a 26mm (1") ring radiator tweeter with central waveguide for improved intelligibility and transparency.

Its dual front vent design allows you to mount them on stands, place them in bookshelves, on a TV cabinet, or incorporate them into custom joinery. Wherever you put them in your room, they will look and sound great.

Key Features:
- 2 x 5" Bass/Mid Driver with 1" voice coil
- 1" dual concentric diaphragm with wave-guide tweeter
- Power Handling: 20 - 160 Watts RMS
- Nominal 6 ohm impedance
- 45Hz > 40kHz Frequency response
- Bass reflex design, front vented
- 10kg each

Krix Graphix Mk2 Centre Speaker

Small and compact, the Graphix is the perfect choice for use in TV cabinets and custom joinery and the dual front ports eliminate ‘boomy’ bass qualities found when using rear ported speakers in this type of application. The Graphix delivers an acoustically intricate experience every time.

Winner of Sound & Image Magazine's 2011 "Home Cinema Speaker System Between $3,000-$6,000" Award.

Make every chair the best seat in your house with a Krix centre speaker. Krix’s centre speakers reproduce vocals and other complex information accurately, optimising imaging and sound stage. The centre channel in your home theatre system can deliver around 70% of the action and should be of a similar sonic quality to your main speakers. For home theatre applications and music listening pleasure, a Krix centre speaker will enhance your sound experience.

Key Features:
- 2 x 5" Bass/Mid Driver with 1" Fabric dome with Neodymium magnet 
- Power Handling: 120W RMS
- Power Handling: Maximum 120W RMS
- Nominal 4 ohm impedance
- Frequency response: 50Hz > 20khz

Krix Seismix 1 Mk5 Subwoofer

For a big bass experience from a discreet subwoofer that can be placed almost anywhere in the room, the Seismix 1 Mk5 will provide the right sound while taking up half the space.

With a hefty 200mm downward firing woofer and vent, and a high quality class D amplifier, the Seismix 1 Mk5 combines high efficiency with low power consumption. Its compact design - with the raised cabinet kept off the floor with specially moulded rubber feet - provides flexibility, without sacrificing bass impact.

With effective design and simple styling, this unobtrusive subwoofer will look and sound great, whether tucked discreetly in the corner or built into custom joinery.

Key Features:
- 1 x 8" bass driver, 1.5" voice coil
- Power Handling: 300W RMS
- Frequency Range: 25Hz-200Hz in room response
- Output: 116dB maximum SPL in room response
- Enclosure Type: Bass reflex, down firing vent
- Low Pass Filter: 50Hz-200Hz or bypass
- Phase Select: 0º to 180º continuously variable (relative to input signal)
- Inputs: Stereo line level RCA

Make it a 5.2 pack by adding a second Seismix 3 [Optional]

Take advantage of the Yamaha RX-V685s dual subwoofer outputs by adding a second Seismix 1 to this package!

Dual subwoofers will enhance your home entertainment experience with an even greater level of bass and low-frequency control that is not possible with a single subwoofer in larger rooms.

 

 Make it a Dolby Atmos or 7.1 pack with additional speakers! [Optional]

If the Equinox bookshelf speakers aren't quite what you want or you're looking for a Dolby Atmos speaker setup (5.1.2), you're welcome to select a more discreet option instead: the Krix Atmospherix AS in-ceiling speakers.

Part of the Krix Architectural Series, the Atmospherix AS is tonally balanced to the Krix floorstanding and bookshelf speaker ranges, making it an ideal speaker system for matching with a Krix home theatre. A large 130mm (5") bass driver with large magnet and copper shorting ring delivers bass and midrange clarity, while a 26mm (1") ring radiator provides extended high frequency performance.

The moving components of the Atmospherix AS are protected from dust and debris through a fully-enclosed back box, designed to optimise the performance from the bass driver, allowing maximum controlled bass and consistency while drastically reducing sound leakage to other rooms. The attractively styled, slim bezel grille is made from rust-resistant stainless steel and snaps into place with magnets, making installation easy. Being paintable, these speakers will involve you in their sound, while disappearing to be heard, but not seen.

Key Features:
- Sound directed toward your listening position
- Easy install
- Discreet home cinema
- 45Hz - 40kHz in-room response
- 90dB sensitivity
- 5 inch, 2-way speakers
- 1" ring radiator tweeter
- 6 Ohm nominal impedance
- Bass reflex, front vented enclosure

- Dimensions: 295mm diameter x 183mm deep
- Mounting cut-out diameter: 247mm
- Input Terminals: Gold plated spring terminals
- Weight: 2.5kg each

Save 20% on matching cables!

You'll need some quality cables to get the most from this satellite system. Why not grab a roll of great value 14AWG speaker cable and a high-quality subwoofer cable at the same time, and save even more!

Simply select the lengths you need and rack up the savings!

These cables feature Oxygen-Free Copper (OFC) conductors which accurately transmit the signal to your speakers for accurate audio reproduction.

To prevent unwanted hum in your subwoofer, this subwoofer cable features mylar-coated aluminium shielding eliminates EMI and RFI interference.