Our stores and customer service department will be CLOSED from Friday 29th through Monday 1st April for the Easter Weekend. (*our website is Always Open!)

The Selby Everyday Price Promise. Shop Now With Confidence!

Rega Planar 1 Plus Turntable with Phono Preamp

SKU
Planar1Plus
In stock
From $849

All the features of the award-winning Planar 1 turntable with the addition of a built-in high-quality MM phono stage, making this the ultimate ‘Plug and Play’ turntable.

Planar 1 Plus - The perfect marriage of convenience and sound quality

When the Rega design team asked themselves, "how do we make the most successful turntable we have ever made sound better, be even easier to use and be more accessible to a wider audience?"

The answer was simple; Rega's engineers added a custom-designed, high quality, moving magnet phono preamp stage based around the multi-award winning 'Fono Mini'.

Key Features:
- 33 & 45 RPM Belt Drive Turntable
- Built-in phono preamp
- Quick setup in under 30 seconds
- Hand-assembled RB110 tonearm
- High quality, low vibration motor
- Phenolic resin, flywheel effect platter
- Factory fitted Rega Carbon moving magnet cartridge
- Available in 2 stunning matte finishes & special edition walnut effect

 

Built-in High-Quality Phono Preamp

The built-in phono stage is a high specification pre-amplifier. It is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an appropriate system or audio amplifier. This allows simple connection to a wide variety of products using either the standard twin phono to phono lead (supplied) or phono to 3.5 mm plug (not supplied).

There are obvious audio advantages to housing the phono stage directly beneath the tonearm. The carefully shielded tonearm wire is soldered directly to the stage which prevents any unwanted pick up via the usual external cable between the arm and stage.

 

Matte Body

Like the Planar 1, the Planar 1 Plus is available in a matte plinth. Each finish option offers a vastly improved appearance over the old design as well as a new ergonomically positioned on/off switch located on the underside of the body.

Tonearm

Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge

Rega Carbon moving magnet (MM) cartridge supplied fitted as standard.

Motor

24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth

Brand new plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available; matte black, and matte white.

Platter

23mm, high mass, phenolic platter with improved flywheel effect for improved speed stability.

Central Bearing housing

Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself while minimising the transfer of potential energy. (Patent pending)

Re-Designed feet

New improved feet to increase stability and reduce vibration transfer.

Motor cover tray

New motor cover tray with integrated cooling.

Balance Weight

New 111g ‘Plug and Play’ balance weight.

More Information
Model Number Planar1PlusBK Planar1PlusWH Planar1PlusMBK Planar1PlusMWH
RRP 849.00
Specs

Specifications:

Type
: Manual belt drive turntable
Speeds: 33, 45 RPM
Tonearm Lift: Hydraulic
Motor: 24 Volt low noise low vibration hand tuned motor assembly

Phono Stage:
Maximum Output Level (3.54 cm/s RMS 45 degrees CBS STR100 Band 6a and 7a): 370-410 mV
Output Impedance: 1 kΩ
Frequency Response (pre-amplifier only): 14 Hz (-3 dB Point) to 100 kHz (-0.6 dB Point)
RIAA Accuracy (pre-amplifier only): (100 Hz to 20 kHz) ± 0.4 dB typically better than ± 0.25 dB
Pre-amplifier Gain: 40 dB
Pre-amplifier Input Loading: 47 kΩ in parallel with 220 pF
Signal to Noise Ratio: -75 dB A-weighted ref maximum output.

Included Components:
Tonearm: Rega RB110 tonearm
Cartridge: Rega Carbon Moving Magnet (MM)
Mat: Felt
Dustcover: Hinged Acrylic dustcover/lid
Plinth: Thermoset plinth design
Platter: Phenolic resin, flywheel effect platter
Dimensions (W x D x H): 447 x 360 x 117 mm  (Lid closed)
Weight: 4.35kg
Colours: Matte Black / Matte White

Designed & Manufactured in England

Write Your Own Review
You're reviewing:Rega Planar 1 Plus Turntable with Phono Preamp
Your Rating
Warranty

Rega components carry a 3 Year Australian warranty covering parts and labour and a lifetime warranty against manufacturing defects.

Cartridges, styli, and consumables carry a 90 day warranty.

To register your product or make a warranty claim online, visit Synergy Audio.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.