We are Open again! Our retail stores are open and trading as normal, 6 days a week. ONLINE = BUSINESS AS USUAL! Learn More

Real Cinema at Home 4K Pack 2


Call to order

As low as $27,499

RRP $31,488

• Australian-made Krix MX-5 speakers

• True Cinema Experience with behind screen speakers

• 7.2.2 Dolby Atmos speaker system

• JVC 4K projector

• Huge Encore CineAcoustiq screen (140-inches)

• Powerful Yamaha and NAD amplifiers

• 4K Blu-ray player

• Premium Tributaries cables

4K Real Cinema At Home Pack 2

Championed by the brand new Krix MX-5 speaker system, this package delivers a powerful and dynamic sound that defies its size. This system is designed to give you a real cinema experience in your own home. The inclusion of the acoustically transparent screen from Encore Screens means that the entire MX-5 system can be positioned behind the picture. Just like in a real commercial cinema!

Powering this demanding system is a modern surround receiver from NAD Electronics as well as a dedicated power amp for the subwoofers from Yamaha. The JVC DLA-N5 4K projector will take any source device you plug in and throw a stunning image on the screen, and all the accessories necessary to get you started are included.

Australian-made Krix speakers
At the core of this package is a massive 7.2.2 Dolby Atmos speaker system from Krix. Krix is a pedigree Australian brand and their iconic speaker systems can be heard in most Australian cinemas, as well as international cinemas. With this fantastic value package, you can bring that room-filling sound to your home!

Perfection can take time
Krix speakers are usually made-to-order in South Australia, with construction beginning once your order has been placed. This process ensures great attention to detail is applied to each and every speaker, but it can also take time - sometimes around 2 weeks.

Package Includes:
Krix MX-5 Modular Speaker System
- Krix Symmetrix 2-Way In-Wall Speaker (x 4)
- Krix Atmospherix AS In Ceiling Speaker (x 2)
NAD T 778 Reference AV Receiver
Yamaha PX3 Stereo Power Amplifier
- JVC DLA-N5 Projector
- Encore Screens 140" 2.35:1 CineAcoustiq 4K Fixed Screen
- Ultramount Projector Mount
- Panasonic DP-UB820 4K HDR Blu-Ray Player
- Tributaries Premium HDMI and Subwoofer cables
- Thor Surge Protected Power Board
- 200m Speaker cable roll + Banana plugs
- Long 10m HDMI over Fibre Optic cable

Krix MX-5 Modular Speaker System

Designed for dedicated home cinemas with an acoustically transparent screen, the MX-5 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat.

Krix has taken their award-winning MX-30 and MX-20 Infinite Baffle modular speaker systems and re-engineered them into a smaller more compact system specifically designed for smaller rooms. But has the famous "wall of sound" cinema experience been lost? Absolutely not! The compact MX-5 system still punches out a wall of sound that plunges through the big screen. As with the other MX modular speaker systems Krix produces, every aspect is optimised to deliver the most faithful reproduction of movie soundtracks, from a whisper to the explosion immediately after, these modules provide a true commercial cinema experience at home.

Key Features
- Behind screen cinema quality speakers
- Based on the award winning MX-20 and MX-30 modular speaker systems
- Easy to install
- Krix Infinite Baffle Wall


Krix Symmetrix 2-Way In-Wall Concealed Speakers

Hear the crackle of leaves underfoot and the sharpness of the violin as the thriller hits its peak. Be immersed in cinema quality sound at home with the wedge-shaped design of the Dynamix, with the same 15 degree angled baffle used in Krix’s commercial cinema surround speakers, providing the ultimate sound experience.

The bass and mid-range are delivered through dual 100mm drivers with a 25mm voice coil wound on high temperature Kapton former, while the tweeter is a 26mm dual concentric diaphragm with wave-guide centre plug for controlled directivity. The bass reflex design delivers efficient yet balanced bass uncharacteristic of its size, while the front ports eliminate any “boomy” bass, often cause by wall mounting a rear-ported design.

Key Features:
- 26mm Ring Tweeter
- Dual 100mm Bass Drivers
- Dual Front Vents
- Enclosed Backbox
- Thin Bezel Magnetic Grille



Krix Atmospherix AS In-Ceiling Height Speakers

This package includes a pair of the Krix Atmospherix AS speakers. As the name suggests, these speakers are perfect for using as height channels in a Dolby Atmos speaker system.

With speaker components mounted directly on the front baffle, the Atmospherix AS delivers a true high fidelity performance, and maintains accurate and controlled bass performance from the discreet in ceiling mounted enclosure.

A large 130mm bass driver with large magnet and copper shorting ring delivers bass and midrange clarity, while a 26mm ring radiator provides extended high frequency performance.

Key Features:
- 5" doped curvilinear paper cone woofer
- 1" ring radiator tweeter
- Bass reflex, front vented
- Cut-out Diameter: 247mm
- Fully-enclosed back box
- Paintable grilles


NAD T 778 Reference AV Receiver

Powering the Krix MX-5 and surround speakers is this modern receiver from NAD Electronics.

NAD's latest reference Audio Video Receiver is a cutting-edge powerhouse that packs support for all the latest technologies in a simple to operate system pumping out a massive 765 real Full Disclosure Power watts to 9 speakers at < 0.08% THD.

Key Features
+ 9 channels of NAD's latest Hybrid Digital Amplifier Technology
+ 9 x 85W (all channels driven simultaneously at full bandwidth at rated distortion)
+ New touch screen and improved ergonomics for user-friendly operation
+ 4K UHD video pass-through
+ High-Res BluOS enabled Network Streaming

 NAD Electronics T 778 Reference AV Receiver Review

"Value for money is what makes NAD stand out from the crowd, and that doesn’t mean dozens of superfluous functions, gizmos and gadgets. Instead, the company has always offered a measure of useful features allied to fine sound and decent but understated build quality."

"The T778 is a gutsy AV receiver that’s equally at home dishing out the sonic mayhem of action blockbusters, as it is revealing the nuances of subtler fare. Pinpoint location of effects gives the T778 a tightly focused soundstage."

Read the full review on StereoNET


Yamaha PX3 Stereo Power Amplifier

With 300W per channel on tap and professional output processing and safety controls, this unassuming Yamaha unit is perfect for loudspeakers or passive subwoofers requiring serious power, such as the Krix MX-5 dual subwoofer modules.

The Yamaha PX series amps are driven by a newly developed Class-D amplifier engine which concentrates all necessary functions into a single custom LSI chip.

A combination of cutting-edge technology and a painstaking component selection process makes the PX3 amplifier supremely efficient, with low noise, reliable protection features, and above all, outstanding sound quality.

Key Features:
- Intelligent Processing. Serious Power.
- 300W x2 into 8 ohms with Power Boost
- Efficient Design
- Flexible Connectivity, Durable Construction
- Sophisticated Signal Processing
- Easy, Intuitive Setup


JVC DLA-N5 Projector

The JVC DLA-N5 D-ILA projector is wrapped in a whole new design, which is packed with the latest projection features. For instance, with the new 0.69-inch native 4K D-ILA device, the projector can produce high-definition native 4K resolution (4096 x 2160) images from its all-glass 65 mm diameter lens system. HDR10 content can be projected at optimum quality with Auto Tone Mapping function, which automatically adjusts settings based on the mastering information. Combining brightness of 1,800 lm with a dynamic contrast ratio of 400,000:1, the projector reproduces life-like images for latest contents like HDR10 and Hybrid Log-Gamma.

Key Features
- Equipped with new 0.69-in 4K D-ILA devices
- Newly developed digital driver LSI for native 4K device
- 65 mm-diameter high-resolution all-glass lens
- 1,800 lm Light Output
- 40,000:1 Native Contrast Ratio
- 400,000:1 Dynamic Contrast Ratio
- Supports High Dynamic Range (HDR10, HLG) content
- Supports Wide Colour Gamut (DCI-P3)


Encore 140" 2.35:1 CineAcoustiq 4K Fixed Screen

Fully reflects picture, fully transmits sound.

The AcoustiWeave 4K material used in this fixed frame projector screen is transparent to sound to the tune of < 1 dB loss from 20Hz to 16kHz, yet offers a solid woven, perforation-free surface for the projected picture to fully reflect to viewers with no moire, minimal light loss and near perfect colour reproduction.

Key Features
- Reference-quality cinema screen
- Exclusive AcoustiWeave 4K screen material that is near totally acoustically transparent AND optically solid, looks and projects identically to traditional matte white screens
- Excellent sound performance
- Near-Perfect neutral in colour, 2% light loss
- Cleanable mould-resistant fabric
- Wall mountable
- Easy installation
- 80mm Heavy-duty Trinity™ aluminium frame wrapped in premium black velour
- Gain factor: 1.1



Ultramount Black Projector Mount

This ceiling-mount bracket is made to provide your compatible JVC projector with ultimate rigidity and perfect balance, minimising any unwanted vibrations or movement which can interrupt your big-screen entertainment.

Key Features:
- One-touch "slide & lock" action makes installation and maintenance easy
- Provides ultimate rigidity and perfect balance to your projector
- Swivel ball-joint allows infinite angle adjustment
- Tilt up to 20 degrees in any direction
- Can be mounted on flat or angled ceilings
- Low profile styling with an overall depth of 10cm



Panasonic DP-UB820 4K HDR Blu-Ray Player

The UB820 4K Ultra HD Blu-ray Player features our unique chroma processing technology to maximise the beauty of 4K/HDR content, built-in wi-fi with a full smart networking suite that supports 4K streaming, and a 7.1-channel analogue audio output for lifelike surround sound.

- Ultra HD Blu-ray Playback (4K/HDR)
- New HCX (Hollywood Cinema Experience) Processor
- 7.1ch Analogue Audio Output
- 4K VOD Supported
- Hi-Res Audio Playback including DSD and ALAC music files
- WiFi and Wired Network support
- Backwards compatible with DVD and CD discs


Tributaries Premium Subwoofer and HDMI cable

Tributaries is a family-owned American audio tech company. They are a leading provider of high-performance digital and analogue audio connection products.

All Tributaries speaker and audio cables are hand-crafted by skilled technicians in the Orlando facility. Each cable features high-grade copper, twinaxial cable geometry, and insulated multi-gauge conductors. Every HDMI cable is hand tested to ensure strict high quality and specifications are met. Tributaries offers a lifetime limited warranty on every cable.

- 2 x Tributaries Series 6 Subwoofer Cables
- Subwoofer cables are assembled by hand in Orlando Florida, USA
- Heavy solid 20AWG HC-OFC conductors
- Dual shielded to lower the noise floor

- 1 x Tributaries UHD48 Ultra HDMI Cable
- Supports Resolutions of 8K/60, 4K/120 & 10K
- Dynamic HDR, eARC, Variable Refresh Rates & Auto Low Latency Mode
- Earned DPL Labs 48Gbps Approval


More Information
Model Number BUN900698
RRP 31,488.00

Krix MX-5 System

MX-5 LCR Speaker Modules
Frequency Range: 40 Hz - 20 kHz in-room response
Power Handling: 50 - 200 Watts RMS recommended amplifier power
Sensitivity: 92dB for 2.83 volts at 1 metre
Impedance: 8 Ohms
Configuration: 2-way
Crossover Point: 1.5 kHz
Low-Frequency Driver: Single 205mm (8") paper cone driver. 38mm (1½") voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion
High-Frequency Driver: 26mm (1") doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide
Dimensions: 700mm high x 315mm wide x 190mm deep (each LCR module)
Dimensions: 700mm high x 2025mm wide x 190mm deep (full system including subwoofer modules)

MX-5 Subwoofer Modules
Frequency Range: 30Hz - 500kHz in-room response
Power Handling: 300 Watts RMS recommended amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Impedance: 4 Ohms
Enclosure Type: Bass reflex, down firing vent
Low-Frequency Driver: Nominal 275mm (11") diameter doped paper cone driver. 50mm (2") voice coil wound on high powered Kapton former, with vented magnet assembly
Dimensions: 700mm high x 540mm wide x 190mm deep (each subwoofer module)
Dimensions: 700mm high x 2025mm wide x 190mm deep (full system including LCR modules)

Krix Symmetrix In-Wall Speakers

Frequency Range: 55Hz - 40kHz (in room response)
Power Handling: 20 - 140 Watts RMS recommended amplifier power
Sensitivity: 89dB for 2.83 volts at 1 metre
Impedance: Nominal 6 Ohms (Minimum 3.5 Ohms)
Configuration: 2-way
Bass Driver: 2 x nominal 100mm (4") doped paper cones. 25mm (1") voice coil wound on high temperature Kapton former
High Frequency Driver: 26mm (1") dual concentric diaphragm with wave-guide centre plug for controlled directivity. Neodymium magnet
Enclosure Type: Bass Reflex
Vent Location: Front
Dimensions: 596mm high x 211mm wide x 79mm mounting depth
Cutout Dimensions: 555mm x 170mm recommended
Weight: 4kg

Krix Atmospherix AS In-Ceiling Speakers

Frequency Range: 45Hz - 40kHz in room response
Power Handling: 20 - 120 Watts RMS recommended amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 5 inch 2-way
Bass Driver(s): Cast aluminium basket with a nominal 130mm (5") doped curvilinear paper cone. 25mm (1") voice coil wound on high powered aluminium former with copper shorting ring. Vented and double magnet shielded
Tweeter: 26mm (1") ring radiator tweeter
Impedance: Nominally 6 Ohms (minimum 3.9 Ohms)
Enclosure Type: Bass reflex, front vented
Dimensions: 295mm diameter x 183mm mounting depth
Mounting cut-out diameter: 247mm recommended
Input Terminals: Gold plated spring terminals
Weight: 2.5kg each

JVC DLA-N5 Projector

Display Resolution: 4096 x 2160

Lens: x2 Motorised Zoom & Focus; All-glass Lens with 65 mm diameter

Lens Shift: ±80% Vertical and ±34% Horizontal (motorised) *In 16:9 aspect mode

Brightness: 1,800 lumens

Contrast Ratio
Dynamic: 400,000:1
Native: 40,000:1

DCI-P3 Colour Gamut: No

Projection Display Size: 60 inch - 200 inch (diagonal)

Light Source Lamp: NSH 265 W (lamp life: approx. 4,500 hours when the lamp is in Low mode)

Input Terminal
HDMI: 2 (3D/Deep Colour/HDCP)
TRIGGER: 1 (Mini Jack, DC12V/100mA)

Output Terminals
3D SYNCHRO: 1 (Mini-Din 3pin)
RS-232C: 1 (Dsub 9pin)

LAN Control Terminals: 1 (RJ-45)

Service Terminal: 1 (USB Type A) (for firmware update)

Digital Video Input Signal Format: 480p, 576p, 720p 60/50, 1080i 60/50, 1080p 60/50/24, 3840x2160p 60/50/30/25/24, 4096x2160p 60/50/30/25/24


3D Format
Frame Packing: 720p 60/50, 1080p 24
Side-by-Side (half): 720p 60/50, 1080p 60/50/24, 1080i 60/50
Top & Bottom: 720p 60/50, 1080p 24

Power Consumption
Projector in use: 400 W
Standby: Eco-mode: 0.3W
Networked standby: 1.3W(LAN), 1.0W(RS232C),1.3W(LAN and RS232C)
Switchover time: 20 min. (To standby or networked standby; default)

Fan Noise: 24dB (When the lamp is in Low Mode)

Power Requirement: AC100-240 V, 50/60 Hz

Dimension (W x H x D, including feet): 500 x 234 x 495 mm

Weight: 19.6 kg

Encore 140" CineAcoustiq Screen

Acoustic transparency: <1dB attenuation from 20Hz to 16kHz
Optical opacity:
2% light loss
Aspect ratio: Cinemascope 2.35:1
Screen size (diagonal): 140 inches / 355.6cm
Screen viewing dimensions (white area): 327.2cm x 139.2cm
Full outer dimensions (including frame): 343.2cm x 155.2cm
Width of black border: 80mm
Screen thickness: 0.55mm
Frame thickness: 3.68cm
Viewing angle: 165 degrees
Gain factor: 1.1

NAD T 778

FTC Power
8 Ohms                                140W (21.5dBW)
4 Ohms                                170W (22.3dBW)
Full Disclosure Power        (all channels driven simultaneously at full bandwidth at rated distortion) 9 x 85W

IHF Dynamic Power
8 Ohms                                165W (22.2dBW)
4 Ohms                                280W (24.5dBW)
Total harmonic distortion  at rated power <0.08%
IM distortion at                   1/3 rated power <0.03%
Damping factor                   >300 (20Hz-1kHz, 8 ohms)
Input sensitivity                  1.12Vrms (ref. 8 Ohms, VOL at 0dB)
Frequency response          +0.3/-0.8dB (ref. 1kHz, 20Hz-20kHz)
Signal/noise ratio               >100dB (ref. rated power at 8 Ohms, A-Weighted)
                                             >85dB (ref. 1W at 8 Ohms, A-Weighted)

Frequency response          ±0.3dB (ref. 20Hz – 20kHz)
Signal-to-noise ratio           >100dB (ref. 2V, A-Weighted)
Total harmonic distortion  <0.01%
Input sensitivity                  245mVrms (ref. 2V)
Maximum output level       >4.5Vrms

Input Sensitivity                  6.2mVrms (ref. 2V)(ref. 20Hz – 20kHz)
Signal-to-noise ratio           >80dB (ref. 2V, A-Weighted)
Maximum Input Level         >90mVrms (1kHz)

Standby power                   <0.5W (full standby)
                                             <8W (network standby)

Unit Dimensions                 (W x H x D) 435 x 140 x 430mm (Gross)
Net Weight                           12.1kg (26.7lb)
Shipping Weight                 15.5kg (34.2lb)

Yamaha PX3 Stereo Power Amplifier

Power Supply Voltage:     220-240V

Output power
:                   300W into 2x 8 ohm speakers
                                           500W into 2x 4 ohm speakers
                                           300W into 2x 2 ohm speakers
Power boost mode           600W into 1x 8 ohm speaker
                                          1000W into 1x 4 ohm speaker

A/D D/A converters:         24-bit linear, 128 times over sampling
THD:                                  0.1% @ 1kHz, 10W
                                          3% @ 1kHz, 50% power
Frequency response:      ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
SNR:                                 100dB (A-weighted, 8Ω, Gain setting = +14dBu)
Crosstalk:                         Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)
Max. voltage gain:           32.1dB / 35.1dB in mono power boost mode
Max. input voltage:          24dB
Line inputs:                      XLR x2, 1/4" TRS phone jack x2
Speaker outputs:             Neutrik SpeakON x2, binding post x4, 1/4" TS phone jack x2
Other I/O:                          USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp
Processing options:        Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
Latency:                            1.5 ms
Presets:                            8 user changeable amplifier presets, saveable to USB stick for transfer
Amplifier protection:       thermal, overcurrent, overvoltage and over-power-limit protection--amplifier restores itself afterwards
Amplifier class:                BTL Class D
Dimensions:                     480x88x388mm WxHxD
Net weight:                       6.9kg
Accessories:                    USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1
Operating Temperature:  0°C to +40°C
Storage temperature:      -20°C to +60°C

Panasonic DP-UB820 4K HDR Blu-Ray Player

Playable Discs

Audio Playback
- Dolby Digital/ TrueHD
- Dolby Digital Plus
- DTS-HD Master Audio/ DTS-HD High Resolution Audio
- Dolby Atmos/ DTS:X

- USB Connections: 1 Front (USB 2.0 High Speed), 1 Rear (USB 3.0 Super Speed)

USB Playback
- Picture: MKV/ MP4 (H.264/HEVC), TS (MPEG-2/H.264/HEVC), MPEG-2/ AVCHD/ AVCHD 3D, JPEG/ MPO

- HCX Processor for Ultra HD Blu-ray
- HDR10+
- Dolby Vision
- Hybrid Log Gamma (HLG)
- 4K Up-scaling
- 4K Direct Chroma Up-scaling
- 4K Networking (4K Video Playback/ 4K JPEG Playback)
- 4K VOD
- Picture Type Presets
- Block/ Randam/ Mosquito Noise Reduction
- Video on Demand in HD Quality
- Ultra HD Premium
- Deep Colour
- x.v.Colour

- Twin HDMI
- Pure Audio on HDMI (HDMI Low Clock Jitter Process)
- High Quality Network Audio Playback (DLNA)
- High Clarity Sound Premium
- Digital Tube Sound
- Surround Re-Master
- Audio D/A Converter

Smart Features
- Viewing Experience Controlled via Voice (Google Assistant/ Amazon Alexa)
- Front Panel Dot Matrix Display
- Remote Control
- Subtitle Position/Brightness Adjustment
- HDAVI Control 5 (VIERA Link)
- Mirroring with Smartphone/Tablet
- Internet Apps
- Web Browser
- Wireless LAN System IEEE802.11 a/b/g/n/ac - yes that's good old Wi-Fi for those who don't understand Panasonic speak
- Network Contents Playback (Client & Renderer)
- External HDD Playback
- Network Drive Access
- BD-Live™

- 2 HDMI Outputs
- Optical Output
- Analogue Audio LR Output
- Analogue Audio 7.1ch Output
- LAN (Ethernet) Terminal

Other Features
- Dimensions (WxHxD): 430 x 62 x 204mm
- Weight: 2.4kg
- Manufacturer's Warranty: 2 Years

Write Your Own Review
You're reviewing:Real Cinema at Home 4K Pack 2
Your Rating

Krix Speakers
All Krix speakers are Australian designed and Australian made.
Krix is so confident in the quality of their products that they provide a 5 Year Warranty with all new Krix speakers.
To claim your warranty, please register your product with Krix within 90 days of the purchase date.

Register with Krix

3 Years
This JVC projector includes a 3-Year Australian warranty.

2 Years
All NAD amps and electronics include a 2 year Australian warranty.

5 Years
All Encore Screens fixed projector screens include a 5 Year Australian warranty.

2 Years
This Panasonic Blu-ray player includes a 2 Year Australian warranty.

5 Years
Yamaha Pro Audio products are covered by a massive 5 year warranty from Yamaha for your peace of mind.

Exclusive Selby Lifetime Warranty
We're so confident in the quality of these Selby premium HDMI cables that we'll give you a Lifetime Warranty!

The screen, bracket, and speaker cable are covered by a 12-month Australian warranty.

If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
We offer a 30 day 100% satisfaction guarantee on all of our products! If your order arrives damaged, faulty or not quite as you expected, please contact us and we will do everything we can to fix the situation.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.