COVID-19 UPDATE: Our retail stores are open again! Click & Collect Still Available. ONLINE = BUSINESS AS USUAL! Learn More

Audio-Technica AT-LPW50PB Turntable Piano Black

SKU
POS-138474
In stock
Special Price $599 Was $699

• 33 & 45 RPM Fully manual, belt-drive operation
• Built-in switchable phono preamp
• Anti-resonance 30mm thick MDF plinth
• Stunning glossy Piano Black finish
• Anti-resonance, die-cast aluminium platter with rubber mat
• Speed-sensor system to maintain accurate platter rotation speed
• Straight matte-finish carbon-fibre tonearm
• Factory fitted AT-VM95E (Black) MM cartridge

Fully Manual Belt-Drive Turntable (Piano Black)

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from your vinyl records. It features an anti-resonance 30mm thick MDF plinth with a high-gloss, piano-black finish. The plinth helps to dampen low-frequency acoustical feedback, and a sensor-monitored motor ensures accurate platter rotation speeds of 33-1/3 and 45 RPM. The straight, matte-finish carbon-fiber tonearm with adjustable tracking force and AT-HS4 universal ½”-mount headshell comes pre-fitted with a black AT-VM95E Dual Moving Magnet phono cartridge.

Key Features:
- 33 & 45 RPM Fully manual, belt-drive operation
- Built-in switchable phono preamp
- Adjustable dynamic anti-skate control
- Anti-resonance, die-cast aluminium platter with rubber mat
- Speed-sensor system to maintain accurate platter rotation speed
- Straight matte-finish carbon-fibre tonearm with hydraulically damped lift control
- Anti-resonance 30mm thick MDF plinth in glossy Piano Black finish
- High-isolation, height-adjustable feet
- Factory fitted AT-VM95E (Black) moving magnet cartridge with 0.3 x 0.7mm elliptical stylus

Stunning Look, Stunning Sound

Marked by the high-gloss, piano-black finish of its anti-resonance plinth, the AT-LPW50PB offers sleek, modern styling to match the supreme accuracy of its sensor-monitored motor.

Built-in Switchable Phono Preamp

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

And being switchable ofcourse if your existing amplifier has a built-in phono pre-amp you wish to use simply set the turntables phono EQ switch to THRU, and the turntables built-in pre-amp will be bypassed.

Tonearm

The AT-LPW40WN features a straight matte-finish carbon-fibre tonearm with adjustable tracking force and anti-skating. The carbon-fibre tonearm provides a rigid, non-resonant structure, whilst remaining extremely lightweight. The included AT-HS4 headshell attaches via a standard half inch universal bayonet style connection.


AT-VM95E Cartridge (Black edition)

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Motor

The DC servo motor features a speed stability control system for greater speed accuracy during playback and helps achieve a wow & flutter rating of just 0.15%.

Over 55 Years of Analog Excellence

Starting in Tokyo in 1962, Audio-Technica has been designing and manufacturing high-performance phono cartridges ever since. That half-century’s worth of analogue expertise goes into every turntable they produce, ensuring you get the best listening experience from your vinyl.

More Information
Model Number AT-LPW50PB
RRP 699.00
Specs

Type: Belt-drive manual turntable
Motor: DC servo with Active Speed Stabilization
Drive Method: Belt drive
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminium
Wow and Flutter: < 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio: >60dB

Output Level
Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
Power Supply Requirements: 100-240 V, 50/60 Hz, 0.5 A Max

Dimensions
With dustcover: 420.0 mm W x 356.0 mm D x 126.0 mm H
Without dustcover and hinges: 420.0 mm W x 356.0 mm D x 114.0 mm H
Weight: 5.56 kg without dust cover

Tonearm type: Static balanced straight carbon tonearm
Effective arm length: 223.6 mm
Overhang: 18.6 mm
Tracking error angle: <2 degrees
Applicable cartridge weight: 12-17 g
Stylus pressure adjustment range: 0-3 g
Replacement Stylus: AT-VMN95E BK

Accessories Included
- Dust cover
- Platter
- Turntable mat
- Drive belt
- Counterweight
- AT-HS4 headshell
- AT-VM95E stereo cartridge (black)
- 45-RPM adapter
- RCA audio cable (approx. 1.0 m)
- AC adapter (approx. 1.5 m)
- Dust cover hinges

Write Your Own Review
You're reviewing:Audio-Technica AT-LPW50PB Turntable Piano Black
Your Rating
12 Months
All Audio-Technica products include a 12 month Australian warranty.

Problems?
If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
Nothing! We offer free post on all orders to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
We offer a 30 day 100% satisfaction guarantee on all of our products! If your order arrives damaged, faulty or not quite as you expected, please contact us and we will do everything we can to fix the situation.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.