17-42 Inch Full Motion Tilt Swivel TV Wall Bracket for Single Stud Mounting LCD LED FMWM343

$32
In Stock.
Warehouse stock status shown. Please contact your store for local availability: Hallam 03 9999 7735 Adelaide 08 8357 7222
Online warehouse availability shown above. Hallam store stock may vary — please call to confirm.
SKU
POS-131684

TV Screen SizeTV WeightTV VESA Patterns

Features:
- Low Profile 'Slimline' design: 67mm from wall
- Extends up to 415mm from the wall
- Pivot/Swivel: up to 90 degrees each way (left/right)
- Tilt: +5 degrees to -12 degrees (Up/Down)
- Cable management hoop

Low Profile 'Slimline' Design
Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it difficult to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 67mm of the wall. Please note however that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall (refer to your TV's user manual), due to heat and ventilation concerns which may shorten the lifespan of your television.

Horizontal Swivel/Pivot (Left/Right)
This bracket allows you to swivel/pivot your TV up to approximately 90 degrees to the left and right. Please note that larger TVs may be limited to an angle smaller than 90 degrees.

Vertical Tilt (Up/Down)
This bracket allows you to tilt your TV up and down approximately +5 degrees (upward) to -12 degrees (downward).

Screws/Bolts
This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation. 

Please Note:
As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs. This bracket can also be mounted on brick/concrete walls. This bracket is suitable for single studs.

TV Screen SizeTV WeightTV VESA Patterns


Will it fit my screen?
This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 500mm wide.
- At least 450mm tall.
The four threaded mounting holes on the back of your TV need to be:
- No more than 400mm apart side to side.
- No more than 400mm apart top to bottom.
Maximum TV weight capacity is 25kg. 

Installation Manual (PDF, 828KB)

Specifications
Model Number FMWM343
RRP 32.00
Specs

Specifications:
- Horizontal Pivot/Swivel: -90 to +90 degrees (approx)
- Vertical Tilt: +5 degrees to -12 degrees
- Distance from wall: 67mm to 415mm
- Maximum weight capacity: 25kg
- Total width of bracket: 430mm
- Total height of bracket: 420mm
- Maximum mounting hole spacing (horizontal): 400mm
- Maximum mounting hole spacing (vertical): 400mm
- Suits VESA standards 400x400mm, 400x200mm, 200x200mm, 200x100mm, 100x100mm, and 75x75mm
- This bracket will also fit holes spaced anywhere between 200mm and 400mm apart.

Installation Manual (PDF, 828KB)

Write Your Own Review
You're reviewing:17-42 Inch Full Motion Tilt Swivel TV Wall Bracket for Single Stud Mounting LCD LED FMWM343
Your Rating
12 Months
All of our products include a minimum 12 month Australian warranty.

Problems?
If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.