Perfect for EXTRA LARGE PLASMAs / LCD TVs.
This high quality, wall-mount bracket is perfect for mounting very large flat panels (LCD / Plasma) to the wall. With two separate mounting plates, vertical extension arms, and a maximum weight capacity of 150kg, this model is suitable for very large, very heavy flat screen displays, up to approx 102". This new model consists of two mounting plates, which can be wall mounted as far apart as necessary, catering for almost any extra large flatscreen TV. Extension Arms are also included, for very large TVs with very large mounting hole patterns. Each mounting plate has a built-in spirit level to assist with accurate installation.
This Model Makes Installation Easy!
It has a locking bar which does not need to be put into place until you are totally done with the installation. That means you can hook the TV on at the1 top AND still gain access at the bottom to attach cables before installing the locking bar. Other models can be hard to mount because you need to attach the cables before you lift the plasma up onto the bracket, which can be a lot harder than it sounds!
Will it fit my screen?
This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 530mm tall.
The four threaded mounting holes on the back of your TV need to be:
- Between 80mm and 800mm apart top to bottom.
-This bracket can accommodate a mounting hole pattern of any width.
Maximum TV weight capacity is 150kg.
Dimensions of the Bracket
- Width: at least 1060mm (Each plate is 530mm)
- Height: 530mm (Without Extension Arms)
- Extended Height: Max 825mm (With Extension Arms)
- Dimension of Each Mounting Plate: 530mm Wide x 235mm High
Dimensions of the Mounting Holes
- Min Height: 80mm
- Max Height: 500mm (Without Extension Arms)
- Max Height: 800mm (With Extension Arms)
- Width: No Limit
Free Bubble Level
This bracket includes a reusable bubble level / spirit level to assist with accurate installation of the bracket.
Features:
- Supports LCD / Plasma TVs from 60" to 150"
- Weight Capacity: 150kg
- Colour: Black
- Lockable (Locking Bars) for extra security!
- Easy to install
- Brand New In Box
- Extension Arms are included
- Fixings supplied for most common installations
- Includes small built-in spirit level
- Also includes a free reusable bubble level
When buying a low profile bracket like this it is important to consult the manual for your TV first. A lot of TVs are not suitable to mount so close to the wall as this bracket is because they need to vent heat. If that's the case with your plasma then you may be better off with our TILT version, as it sits slightly further away from the wall.
As with all wall brackets it is essential that this bracket is fixed to timber studs when mounting on plaster board walls.
Please Note:
Some panels require M6 16mm bolts which are not included. This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation. Please check manufacturers specifications of screen prior to installing.
User Manual (PDF, 1,112KB)
| Model Number | 125920 |
|---|---|
| RRP | 84.00 |
| Specs | Bracket width:1060mm (Each plate is 530mm) User Manual (PDF, 1,112KB) |
